Universal ECU Bench Flash Cable with OBD2 Port
Be the first to review this product
This universal pin out cable allows you to connect easily and comfortably to most types control units.
Now with even more connections and pins types, you can connect to a wide variety of ECU’s.
The cable is fitted with an OBD2 female plug allowing connection any OBD flash tool.
- Female OBD2 port
- Power connections by 12V and GND crocodile clips or 2.1mm DC power jack. (Power supply not included)
- LED indicator to confirm when ECU is ON.
- 6 x 12V connectors for ECU
- 6 x GND connectors for ECU
- 3 x switched ignition connectors for ECU
- Switched ECU Power (ON/OFF)
- Switched CAN bus termination resistors (60Ω / 120Ω / OFF)
- Switch-able ignition pins (OFF / ON / K-Line) for tools using K-Line for reset function
- 2 x CAN Low
- 2 x CAN High
- 1 x CAN2 Low (Ford / Volvo)
- 1 x CAN2 High (Ford / Volvo)
- 2 x K-Line
- 1 x L-Line
- Kline with diode N4148 for reset function
- Bootpins: 560Ω / 1KΩ / 4.7KΩ